Lost password ? Create account

Main menu

Proceeding

HELP

@ Contact

Planning

Week Mon. 07 Tue. 08 Wed. 09 Thu. 10 Fri. 11 List

‹ Wednesday, October 9, 2024 ›

08:00

09:00

10:00

11:00

12:00

13:00

14:00

15:00

16:00

17:00

18:00

19:00

20:00

21:00

22:00

23:00

›8:30 (40min)

Characterization of Organic Footprint from Moon, Mars and Ocean Worlds Landing Systems for Robotic and Crewed Missions
C. Soares, JPL

› auditorium

8:30 - 9:10 (40min)

Characterization of Organic Footprint from Moon, Mars and Ocean Worlds Landing Systems for Robotic and Crewed Missions

auditorium

C. Soares, JPL

›9:10 (1h20)

Contamination #2
JF. Roussel (ONERA) & O. Ergincan (ESA)

› auditorium

9:10 - 10:30 (1h20)

Contamination #2

auditorium

JF. Roussel (ONERA) & O. Ergincan (ESA)

› Analysis of Particle Contamination Generated by Ion Thruster Sputtering on Thermal Control Paint - Shun Imai, Japan Aerospace Exploration Agency [Sagamihara] 09:10-09:30 (20min)

› Polymers sputtering and induced contamination due to plasma thrusters - Marc Villemant, DPHY, ONERA, Université de Toulouse 09:30-09:50 (20min)

› Ground-based experimental study on the contamination potential of a freely expanding 10 N bi-propellant thruster plume - Leonie Buntrock, German Aerospace Center 09:50-10:10 (20min)

› The EPIC-2 Bipropellant Plume-Induced Contamination Test Program and Application to Europa Clipper, Lunar Gateway and the International Space Station Programs - Carlos Soares, Jet Propulsion Laboratory 10:10-10:30 (20min)

›10:30 (30min)

Coffee break

› Exhibition hall

10:30 - 11:00 (30min)

Coffee break

Exhibition hall

›11:00 (1h)

Standards and Regulation
E. Laurent (CNES) & M. Holynska (ESA)

› auditorium

11:00 - 12:00 (1h)

Standards and Regulation

auditorium

E. Laurent (CNES) & M. Holynska (ESA)

› Development of the long-term storage guidelines for materials and processes: a European collaboration to draw-up harmonized recommendations and good practices. - Theo Henry, ESA-ESTEC, TEC-QEE, Keplerlaan 1, 2200 AZ Noordwijk, The Netherlands 11:00-11:20 (20min)

› Regulatory challenges for the European space sector - Adrian Tighe & Sarah Rodriguez-Castillo, ESA - ESTEC (Netherlands) 11:20-11:40 (20min)

› Solvents and calibration standards alternatives with reduced environmental impact for space activities - Delphine Faye, CNES, Toulouse, France 11:40-12:00 (20min)

›12:00 (30min)

Presentation of posters

› auditorium

12:00 - 12:30 (30min)

Presentation of posters

auditorium

https://ismse16.sciencesconf.org/data/program/posters_list_per_session_v8.pdf

›12:30 (1h30)

Lunch

› Exhibition hall

12:30 - 14:00 (1h30)

Lunch

Exhibition hall

›14:00 (3h)

Posters Session

› Exhibition hall

14:00 - 17:00 (3h)

Posters Session

Exhibition hall

› A New Dust Simulant Source with a Dust Flow Plasma Accelerator - Jacob Kleiman, Integrity Testing Laboratory Inc 14:00-17:00 (3h)

› Destination Moon! How “Luna” Dust Affects Photovoltaic Modules? - Philippe Voarino, Univ. Grenoble Alpes, CEA, Liten, Campus Ines 14:00-17:00 (3h)

› Aging and characterization of rigid polyurethane foams containing lunar regolith simulant - Tamás Répási, Admatis Ltd. 14:00-17:00 (3h)

› Materials design aspects for a lunar habitation - Cathal Mooney, ESA 14:00-17:00 (3h)

› Effect of plasma treatment on mineral availability in water for space hydroponics - Syamlal Sasi, School of Engineering, ANU College of Engineering, Computing and Cybernetics, Australian National University, Acton, ACT 2601 14:00-17:00 (3h)

› The Evolution of the ESA REACH Tool – An Automated Materials Obsolescence Management Tool for the Space Sector - Premysl Janik, ESA - ESTEC (Netherlands) 14:00-17:00 (3h)

› Augmenting the outgassing screening test with the use of QCMs - Mircea Alexandru Helici, ESA - ESTEC (Netherlands) 14:00-17:00 (3h)

› Testing of materials for dense atomic oxygen and high drag environments - Agnieszka Suliga, ESA - ESTEC (Netherlands) 14:00-17:00 (3h)

› Design and developing MUSE (Material Usage Space tEsting ) facility - Federica Geraci, Thales Alenia Space Italia 14:00-17:00 (3h)

› On-ground and in-orbit experiments: new insight to reveal Atomic Oxygen Induced Contamination - Riyo Yamanaka, Japan Aerospace Exploration Agency [Tsukuba] - Delphine Faye, Centre National d'Études Spatiales [Toulouse] 14:00-17:00 (3h)

› Atomic Oxygen erosion resistance of graphene-reinforced polyimide composites for Low Earth Orbit Satellites. - Karthika Prasad, School of Engineering, ANU College of Engineering, Computing and Cybernetics, 35 Science Road, Acton, 2601 14:00-17:00 (3h)

› Materials outgassing: impact of environmental conditions - Amal Ghodhbani, service laboratoires et expertise 14:00-17:00 (3h)

› Portable fallout monitoring instrument for particle tracking in space applications - Francesco Zanetto, Dipartimento di Electtronica, Informazione e Bioingegneria [Politecnico Milano] 14:00-17:00 (3h)

› Laser cleaning of molecular contamination on optical components - Frank WAGNER, Institut Fresnel 14:00-17:00 (3h)

› Assessment of MOC contamination behavior of polymeric foil materials regarding long-term storage scenarios – results of a 2 years test campaign - Markus Keller, Fraunhofer IPA 14:00-17:00 (3h)

› Contamination detection via fluorophore system - Guillaume Rioland, Centre National d'Études Spatiales [Toulouse] 14:00-17:00 (3h)

› Study of the morphology of contaminant deposits in space environment - Aurélie Zamo, DPHY, ONERA, Université de Toulouse 14:00-17:00 (3h)

› New submicron infrared microspectroscopy for failure and contamination analysis - Guillaume Rioland, Centre National d'Études Spatiales [Toulouse] 14:00-17:00 (3h)

› Photocatalytic activity of MoO3 using quartz crystal microbalance in vacuum for contamination control of spacecrafts - Naoki Shimosako, Shizuoka Univ. 14:00-17:00 (3h)

› A comparative study of the different particle deposition monitoring methods - Abel Brieva, ESA - ESTEC (Netherlands) 14:00-17:00 (3h)

› Cleanliness Challenges on Esprit Refueling Module on Gateway - Séverine Blanc, ThalesAleniaSpace 14:00-17:00 (3h)

› Development of New Calibration Methodology for FT-IR Molecular Organic Contamination (MOC) Determination - Robert Szczęsny, Faculty of Chemistry [Toruń] 14:00-17:00 (3h)

› Fluorescence and FTIR portative instruments for contamination analysis - Emmanuel GOUISSET, Intraspec Technologies 14:00-17:00 (3h)

› Sun Intrusion Testing on materials - Ricardo Martins, ESA-ESTEC, TEC-QEE, Keplerlaan 1, 2200 AZ Noordwijk, The Netherlands 14:00-17:00 (3h)

› ESA's “Materials4CubeSats” Open Lab Test Campaign - Adrian Tighe, ESA - ESTEC (Netherlands) - Aurélie Hand, ESA - ESTEC (Netherlands) 14:00-17:00 (3h)

› Behaviour of contamination repellent coatings (CRC) under long term UV exposure - Frank Meyer, CeraNovis GmbH 14:00-17:00 (3h)

› CHARGING EFFECTS MITIGATION USING INNOVATIVE CONDUCTIVE MATERIALS - Angel Yedra, CTC - Miguel Ramiro, DHV - Juanjo Medina, ALTER Technology 14:00-17:00 (3h)

› PICOMAX : A new experimental platform for the characterization of erosion and contamination induced by space environment and plasma thrusters - Thierry Paulmier, DPHY, ONERA, Université de Toulouse 14:00-17:00 (3h)

› Effect of proton irradiation on modern Ga-doped Si heterojunction solar cells - Océane Guillot, Institut National de L'Energie Solaire 14:00-17:00 (3h)

› Continuation of Solar Absorptivity Degradation of Spacecraft Materials Due to UV and Charged Particles in the Gateway Environment - Brandon Hoffmann, Jacobs Technology ESCG - Abigail Zinecker Howard, NASA Johnson Space Center - Brittany Spivey, Jacobs Technology ESCG - Griffin Jayne, NASA Goddard Space Flight Center 14:00-17:00 (3h)

› Accelerated aging of tapes for spacecraft structures: a comparison of rubber and silicone-based of Pressure Sensitive Adhesives tapes (PSA). - Theo Henry, ESA-ESTEC, TEC-QEE, Keplerlaan 1, 2200 AZ Noordwijk, The Netherlands 14:00-17:00 (3h)

› The performance testing of the ACES SHM vacuum system - Yuriy Butenko, ESA - ESTEC (Netherlands) 14:00-17:00 (3h)

› Thermal emissivity: temperature dependent measurements - Bruno Bras, ESA - ESTEC (Netherlands) - Szilvia Szmolka, ESA - ESTEC (Netherlands) 14:00-17:00 (3h)

› Lifetime assessment of materials for space environment using Dynamic Mechanical Analyser (DMA) - Livia D'Onofrio, Thales Alenia Space 14:00-17:00 (3h)

› THE COMPLEX IRRADIATION FACILITY (CIF) AT DLR BREMEN - Erik Klein, German Aerospace Center (DLR), Institute of Space Systems, Bremen, Germany 14:00-17:00 (3h)

› Examples of laboratory tests to assess formulation changes - Sarah Rodriguez, European Space Research and Technology Centre 14:00-17:00 (3h)

› Material compatibility and accelerated aging study of space relevant polymers - Lucia Propato, Thales Alenia Space - Livia D'Onofrio, Thales Alenia Space 14:00-17:00 (3h)

› Overview of the European FIAMMA flammability facility for Human Space Missions - Cathal Mooney, ESA 14:00-17:00 (3h)

› Comparison test result between conventional CQCM and advanced cryo-TQCM at liquid nitrogen temperature. - Hiroki Kimura, NIHON DEMPA KOGYO CO.,LTD. 14:00-17:00 (3h)

› Virtual Lab: the digitalization of qualification testing laboratory. - Mari Carmen López, ALTER Technology 14:00-17:00 (3h)

› Study of polymer films for stratospheric balloon envelopes - Simon Lewandowski, DPHY, ONERA, Université de Toulouse 14:00-17:00 (3h)

› Flexible Perovskite solar cells employing in-house engineered hole transport material irradiated under atmosferic neutrons - Giulio Koch, Universita degli Studi di Roma Tor Vergata 14:00-17:00 (3h)

› Mechanical behavior of balloon's enveloppe materials in stratospheric environment - LAURE GEVAUX, Centre National d'Études Spatiales [Toulouse] 14:00-17:00 (3h)

› ESA ESTEC's charging properties measurement facility simulation - Grégoire Déprez, ESA - ESTEC (Netherlands) 14:00-17:00 (3h)

› Contamination flight experiments : detection/trapping and UV radiation exposure - Emmanuel GOUISSET, Intraspec Technologies 14:00-17:00 (3h)

› Presentation of EMA CNES samples: an update before flight - Sophie Perraud, Centre National d\'Études Spatiales [Toulouse] 14:00-17:00 (3h)

› Secondary Electron Emission Measurements of Black paint for on-orbit demonstration evaluation - Kumi Nitta, Japan Aerospace Exploration Agency 14:00-17:00 (3h)

› LSTM Mission: Performance evaluation of contamination effects in the infra-red - Szilvia Szmolka, European Space Agency - ESTEC 14:00-17:00 (3h)

› Results of MISSE-14 Solar & Drag Sail Material Test - Andreas Witzke, German Aerospace Center (DLR), Institute of Space Systems, Bremen, Germany 14:00-17:00 (3h)

› Can thin films deposited by ALD reduce the outgassing? A case study by dynamic outgassing on 3D-printed Polyether Ether Ketone (PEEK). - Theo Henry, ESA-ESTEC, TEC-QEE, Keplerlaan 1, 2200 AZ Noordwijk, The Netherlands 14:00-17:00 (3h)

› Synthesis of self-healing polymers for space applications - Mickael Du Fraysseix, Team 1 LCPO : Polymerization Catalyses & Engineering, ONERA, Centre National d\'Études Spatiales [Toulouse] - Simon Lewandowski, ONERA 14:00-17:00 (3h)

› Nanostructuring of phenolic matrices by polymeric additives in ablative materials for re-entry space vehicles - Rita Bottacchiari, Department of Chemical Engineering Materials Environment, Sapienza University of Rome, via Eudossiana 18, 00184 Rome, Italy. INSTM reference Laboratory for Materials and Surface Treatments 14:00-17:00 (3h)

› Development of novel lubricant formulations for application in space environment - Fabian Schüler, Materiales GmbH 14:00-17:00 (3h)

› Black Low Reflectance Inorganic Coating for Metal Additive Manufactured Satellite Lightweight Components - Suman Shrestha, Keronite Curtiss-Wright Surface Technology 14:00-17:00 (3h)

› MATREX - MATerial Recording EXperience: Materials database for space application - Marion Broutelle, Centre National d\'Études Spatiales [Toulouse] 14:00-17:00 (3h)

› Development of a new Silicon Carbide thermal spray coating for space applications. - Daniel Perello-Badia, Seram Coatings AS 14:00-17:00 (3h)

› Enhancing Space Deployable Structures: Self-Deployable Smart Composites Integrating 3D Graphene Foam with Shape Memory Polymers and Thermal Control Coatings - Ranjana Shivakumar, Nanyang Technological University 14:00-17:00 (3h)

› NORMALLY CLOSED VALVE WITH SHAPE MEMORY ALLOY ACTUATOR – A SHAPE MEMORY ALLOY APPLICATION EXAMPLE - Christian Lenz, Ariane Group 14:00-17:00 (3h)

› Innovative repairing technique via Additive Manufacturing - Andrea Di Benedetto, Thales Alenia Space 14:00-17:00 (3h)

› Thermoplastic composites for satellite bus structure - Gizynski Maciej, Lukasiewicz Research Network - Institute of Aviation 14:00-17:00 (3h)

› Impact of porosity on thermal and mechanical properties of copper parts additively manufactured by material extrusion (MEX) - Bernardo Alves, Centre for Mechanical Engineering, Materials and Processes 14:00-17:00 (3h)

› ACTIVE PZT CERAMIC PROTECTION ON CARBON RELATED ORBITAL STRUCTURE FOR SPACE ENVIRONMENTAL DAMAGE - Daeweon Kim, Silla University 14:00-17:00 (3h)

› Physical properties of pure transition metal nitrides thin films - Marjorie CAVARROC, Safran Tech, Chateaufort, CS 80112, 78772 Magny-les-Hameaux, France 14:00-17:00 (3h)

› Flexible Lightweight Photoelectronic Materials and Devices for Space Applications - Min Qian, East China Univeristy of Science and Technology 14:00-17:00 (3h)

› Physical properties of pure vanadium nitrides thin films - Marjorie CAVARROC, Safran Tech, Chateaufort, CS 80112, 78772 Magny-les-Hameaux, France 14:00-17:00 (3h)

› Testing with Dust at the DROP lab of ONERA : facilities and approach - Sophie Duzellier & Jean-Charles Matéo-Vélez, DPHY, ONERA, Université de Toulouse 14:00-17:00 (3h)

›15:30 (1h30)

Round Tables

› auditorium and side rooms

15:30 - 17:00 (1h30)

Round Tables

auditorium and side rooms

https://ismse16.sciencesconf.org/data/program/Round_tables_2.pdf

›19:00 (4h55)

Conference Dinner

19:00 - 23:55 (4h55)

Conference Dinner

ESTEREL Arena

Session

Speech

Logistics

Break

Tour

Privacy | Accessibility