Monday, October 7, 2024
Time | Event | (+) |
09:00 - 09:30 | Conference doors open and registration - Registration/Welcome desk open Monday-Thursday | |
09:30 - 10:30 | Opening Session #1 (auditorium) | |
10:30 - 11:00 | Coffee break (Exhibition hall) | |
11:00 - 12:30 | Opening Session #2 (auditorium) | |
12:30 - 14:00 | Lunch (Exhibition hall) | |
14:00 - 16:00 | Innovative & Sustainable Materials #1 (auditorium) - E. Grossman (Noga 3D Inn.) & K. Jokela (Isaware) | (+) |
14:00 - 14:30 | › Development of Advanced Materials for Space Deployables - Edwin Teo, Nanyang Technological University | |
14:30 - 14:50 | › Innovative and sustainable materials for space application - Ugo Lafont, ESA-ESTEC, TEC-QEE, Keplerlaan 1, 2200 AZ Noordwijk, The Netherlands | |
14:50 - 15:10 | › Use of biobased materials in Space : not only sustainable but a real competitive advantage - Christian Puig, Airbus [France] | |
15:10 - 15:30 | › Material recycling and hardware re-use for Moon and Martian settlement - Francesco Caltavituro, Orbitale Hochtechnologie Bremen | |
15:30 - 15:50 | › Polymer Coatings as a Pathway to atomic level cleanliness, bioburden reduction and surface sampling of DNA - James Hamilton, University of Wisconsin-Platteville | |
16:00 - 16:30 | Coffee break (Exhibition hall) | |
16:30 - 18:10 | Environment Effects on Materials #1 (auditorium) - J. Eck (ESA) & K. de Groh (NASA GRC) | (+) |
16:30 - 16:50 | › Solar Wind Proton Flux on Space Exposed Materials in the Interplanetary Environment - Joseph Minow, NASA Marshall Space Flight Center | |
16:50 - 17:10 | › Dose level at the surface of materials in space environment - Christophe Inguimbert, DPHY, ONERA, Université de Toulouse | |
17:10 - 17:30 | › Estimation of End-of-Life Solar Absorptivity for Complex, Multi-Phased Space Missions - Brandon Hoffmann, Jacobs Technology ESCG - Abigail Zinecker Howard, NASA Johnson Space Center | |
17:30 - 17:50 | › Synergistic Effects of Dual Source Irradiation with Protons and Electrons - Erik Klein, Institute of Space Systems, Mechanics & Thermal Systems | |
17:50 - 18:10 | › Impact of Single and Combined Space Environment Factors on the Performance of Elastomer Micropatterned Dry Adhesives - Lennart Ziemer, Technical University of Berlin / Technische Universität Berlin | |
18:30 - 20:30 | Welcome Cocktail - Offered by ITL in Exhibition Hall |
Tuesday, October 8, 2024
Time | Event | (+) |
08:30 - 09:10 | Advancements in Lunar Dust Mitigation (auditorium) - R. Lee (Booz Allen Hamilton) | |
09:10 - 10:30 | Planetary Environment & Lunar Dust Mitigation #1 (auditorium) - J. Kleiman (ITL inc.) & S. Gendron (CSA) | (+) |
09:10 - 09:30 | › Characterization of thermo-optical properties of Power and Thermal Functional Surfaces Exposed to Lunar Dust Simulants - Sophie Duzellier, DPHY, ONERA, Université de Toulouse | |
09:30 - 09:50 | › An investigation of lunar dust simulant adhesion using a centrifuge system under high vacuum and UV irradiation conditions - Alice Suarez Kahan, DPHY, ONERA, Université de Toulouse | |
09:50 - 10:10 | › The Dusty Environment Application and Research DEAR project - Harald Steininger, OHB System AG | |
10:10 - 10:30 | › Status of Gateway Lunar Dust Modeling and the Study of Dust During Docking - Ronald Lee, Booz Allen Hamilton | |
10:30 - 11:00 | Coffee break (Exhibition hall) | |
11:00 - 12:30 | Atomic Oxygen & LEO/VLEO Missions #1 (auditorium) - T. Minton (Univ. Colorado) & M. Tagawa (Kobe Univ.) | (+) |
11:00 - 11:20 | › Space-durable, 3D printed, high-performance polymers based on cyanate ester/extended-bismaleimide - Eitan Grossman, NOGA 3D Innovations, Soreq NRC | |
11:20 - 11:40 | › Effects of Atomic Oxygen on White Kapton and Flexible Flat Cables for the Interconnections in Solar Arrays - Miguel Ramiro, DHV Technology | |
11:40 - 12:00 | › Evaluation of the Atomic Oxygen Effect in case of Complex Geometry: Optimization of Simulation and Prediction for the EMA-SESAME Experiment - David Lévêque, DPHY, ONERA, Université de Toulouse | |
12:00 - 12:20 | › Evaluation of the Atomic-Oxygen Resistance of Hybrid Organic/Inorganic Polymers from Lab and LEO Exposures - Aki Goto, Japan Aerospace Exploration Agency [Tsukuba], University of Colorado [Boulder] | |
12:30 - 14:00 | Lunch (Exhibition hall) | |
14:00 - 16:00 | Contamination #1 (auditorium) - G. Rioland (CNES) & M. Grabe (DLR) | (+) |
14:00 - 14:20 | › Overview of the Lunar Gateway External Contamination Environment - Crystal Quiroz, Oceaneering, JETS Contract, Houston, TX, USA | |
14:20 - 14:40 | › Outgassing laws unraveled by characterizing variable thickness materials at species-level - Jean-François Roussel, DPHY, ONERA, Université de Toulouse | |
14:40 - 15:00 | › Development of Lunar Gateway External Molecular Outgassing Contamination Models - William A. Hoey, Jet Propulsion Laboratory, California Institute of Technology | |
15:00 - 15:20 | › Influence of outgassing and desorption on pressure in spacecraft cavities in flight - Jean-François Roussel, DPHY, ONERA, Université de Toulouse | |
15:30 - 16:00 | Coffee break (Exhibition hall) | |
16:00 - 17:30 | Flight Experiment & Data (auditorium) - Y. Kimoto (Jaxa) & D. Mueller (ETH Zurich) | (+) |
16:00 - 16:20 | › THERME experiments: a matter of contamination deposit morphology - David Lansade, DPHY, ONERA, Université de Toulouse | |
16:20 - 16:40 | › Overview of Results from the MISSE 9-15 Polymers and Composites Experiment 1-4 (PCE 1-4) - Kim de Groh, NASA Glenn Research Center | |
16:40 - 17:00 | › New Materials for LEO, GEO and Planetary Environments: Preliminary Results from MISSE-17 Experiment - Jacob Kleiman, Integrity Testing Laboratory Inc | |
17:00 - 17:20 | › Presentation of EMA : assembly, integration and testing - Isabelle Savin Delarclause, Centre National d'Études Spatiales [Toulouse] |
Wednesday, October 9, 2024
Time | Event | (+) |
08:30 - 09:10 | Characterization of Organic Footprint from Moon, Mars and Ocean Worlds Landing Systems for Robotic and Crewed Missions (auditorium) - C. Soares, JPL | |
09:10 - 10:30 | Contamination #2 (auditorium) - JF. Roussel (ONERA) & O. Ergincan (ESA) | (+) |
09:10 - 09:30 | › Analysis of Particle Contamination Generated by Ion Thruster Sputtering on Thermal Control Paint - Shun Imai, Japan Aerospace Exploration Agency [Sagamihara] | |
09:30 - 09:50 | › Polymers sputtering and induced contamination due to plasma thrusters - Marc Villemant, DPHY, ONERA, Université de Toulouse | |
09:50 - 10:10 | › Ground-based experimental study on the contamination potential of a freely expanding 10 N bi-propellant thruster plume - Leonie Buntrock, German Aerospace Center | |
10:10 - 10:30 | › The EPIC-2 Bipropellant Plume-Induced Contamination Test Program and Application to Europa Clipper, Lunar Gateway and the International Space Station Programs - Carlos Soares, Jet Propulsion Laboratory | |
10:30 - 11:00 | Coffee break (Exhibition hall) | |
11:00 - 12:00 | Standards and Regulation (auditorium) - E. Laurent (CNES) & M. Holynska (ESA) | (+) |
11:00 - 11:20 | › Development of the long-term storage guidelines for materials and processes: a European collaboration to draw-up harmonized recommendations and good practices. - Theo Henry, ESA-ESTEC, TEC-QEE, Keplerlaan 1, 2200 AZ Noordwijk, The Netherlands | |
11:20 - 11:40 | › Regulatory challenges for the European space sector - Adrian Tighe & Sarah Rodriguez-Castillo, ESA - ESTEC (Netherlands) | |
11:40 - 12:00 | › Solvents and calibration standards alternatives with reduced environmental impact for space activities - Delphine Faye, CNES, Toulouse, France | |
12:00 - 12:30 | Presentation of posters and round tables (auditorium) | |
12:30 - 14:00 | Lunch (Exhibition hall) | |
14:00 - 17:00 | Posters Session (Exhibition hall) | (+) |
14:00 - 17:00 | › A New Dust Simulant Source with a Dust Flow Plasma Accelerator - Jacob Kleiman, Integrity Testing Laboratory Inc | |
14:00 - 17:00 | › Destination Moon! How “Luna” Dust Affects Photovoltaic Modules? - Philippe Voarino, Univ. Grenoble Alpes, CEA, Liten, Campus Ines | |
14:00 - 17:00 | › Aging and characterization of rigid polyurethane foams containing lunar regolith simulant - Tamás Répási, Admatis Ltd. | |
14:00 - 17:00 | › Materials design aspects for a lunar habitation - Cathal Mooney, ESA | |
14:00 - 17:00 | › Effect of plasma treatment on mineral availability in water for space hydroponics - Syamlal Sasi, School of Engineering, ANU College of Engineering, Computing and Cybernetics, Australian National University, Acton, ACT 2601 | |
14:00 - 17:00 | › The Evolution of the ESA REACH Tool – An Automated Materials Obsolescence Management Tool for the Space Sector - Premysl Janik, ESA - ESTEC (Netherlands) | |
14:00 - 17:00 | › Augmenting the outgassing screening test with the use of QCMs - Mircea Alexandru Helici, ESA - ESTEC (Netherlands) | |
14:00 - 17:00 | › Testing of materials for dense atomic oxygen and high drag environments - Agnieszka Suliga, ESA - ESTEC (Netherlands) | |
14:00 - 17:00 | › Design and developing MUSE (Material Usage Space tEsting ) facility - Federica Geraci, Thales Alenia Space Italia | |
14:00 - 17:00 | › On-ground and in-orbit experiments: new insight to reveal Atomic Oxygen Induced Contamination - Riyo Yamanaka, Japan Aerospace Exploration Agency [Tsukuba] - Delphine Faye, Centre National d'Études Spatiales [Toulouse] | |
14:00 - 17:00 | › Atomic Oxygen erosion resistance of graphene-reinforced polyimide composites for Low Earth Orbit Satellites. - Karthika Prasad, School of Engineering, ANU College of Engineering, Computing and Cybernetics, 35 Science Road, Acton, 2601 | |
14:00 - 17:00 | › Materials outgassing: impact of environmental conditions - Amal Ghodhbani, service laboratoires et expertise | |
14:00 - 17:00 | › Portable fallout monitoring instrument for particle tracking in space applications - Francesco Zanetto, Dipartimento di Electtronica, Informazione e Bioingegneria [Politecnico Milano] | |
14:00 - 17:00 | › Laser cleaning of molecular contamination on optical components - Frank WAGNER, Institut Fresnel | |
14:00 - 17:00 | › Assessment of MOC contamination behavior of polymeric foil materials regarding long-term storage scenarios – results of a 2 years test campaign - Markus Keller, Fraunhofer IPA | |
14:00 - 17:00 | › Contamination detection via fluorophore system - Guillaume Rioland, Centre National d'Études Spatiales [Toulouse] | |
14:00 - 17:00 | › Study of the morphology of contaminant deposits in space environment - Aurélie Zamo, DPHY, ONERA, Université de Toulouse | |
14:00 - 17:00 | › New submicron infrared microspectroscopy for failure and contamination analysis - Guillaume Rioland, Centre National d'Études Spatiales [Toulouse] | |
14:00 - 17:00 | › Photocatalytic activity of MoO3 using quartz crystal microbalance in vacuum for contamination control of spacecrafts - Naoki Shimosako, Shizuoka Univ. | |
14:00 - 17:00 | › A comparative study of the different particle deposition monitoring methods - Abel Brieva, ESA - ESTEC (Netherlands) | |
14:00 - 17:00 | › Cleanliness Challenges on Esprit Refueling Module on Gateway - Séverine Blanc, ThalesAleniaSpace | |
14:00 - 17:00 | › Development of New Calibration Methodology for FT-IR Molecular Organic Contamination (MOC) Determination - Robert Szczęsny, Faculty of Chemistry [Toruń] | |
14:00 - 17:00 | › Fluorescence and FTIR portative instruments for contamination analysis - Emmanuel GOUISSET, Intraspec Technologies | |
14:00 - 17:00 | › Sun Intrusion Testing on materials - Ricardo Martins, ESA-ESTEC, TEC-QEE, Keplerlaan 1, 2200 AZ Noordwijk, The Netherlands | |
14:00 - 17:00 | › ESA's “Materials4CubeSats” Open Lab Test Campaign - Adrian Tighe, ESA - ESTEC (Netherlands) - Aurélie Hand, ESA - ESTEC (Netherlands) | |
14:00 - 17:00 | › Behaviour of contamination repellent coatings (CRC) under long term UV exposure - Frank Meyer, CeraNovis GmbH | |
14:00 - 17:00 | › CHARGING EFFECTS MITIGATION USING INNOVATIVE CONDUCTIVE MATERIALS - Angel Yedra, CTC - Miguel Ramiro, DHV - Juanjo Medina, ALTER Technology | |
14:00 - 17:00 | › PICOMAX : A new experimental platform for the characterization of erosion and contamination induced by space environment and plasma thrusters - Thierry Paulmier, DPHY, ONERA, Université de Toulouse | |
14:00 - 17:00 | › Effect of proton irradiation on modern Ga-doped Si heterojunction solar cells - Océane Guillot, Institut National de L'Energie Solaire | |
14:00 - 17:00 | › Continuation of Solar Absorptivity Degradation of Spacecraft Materials Due to UV and Charged Particles in the Gateway Environment - Brandon Hoffmann, Jacobs Technology ESCG - Abigail Zinecker Howard, NASA Johnson Space Center - Brittany Spivey, Jacobs Technology ESCG - Griffin Jayne, NASA Goddard Space Flight Center | |
14:00 - 17:00 | › Accelerated aging of tapes for spacecraft structures: a comparison of rubber and silicone-based of Pressure Sensitive Adhesives tapes (PSA). - Theo Henry, ESA-ESTEC, TEC-QEE, Keplerlaan 1, 2200 AZ Noordwijk, The Netherlands | |
14:00 - 17:00 | › The performance testing of the ACES SHM vacuum system - Yuriy Butenko, ESA - ESTEC (Netherlands) | |
14:00 - 17:00 | › Thermal emissivity: temperature dependent measurements - Bruno Bras, ESA - ESTEC (Netherlands) - Szilvia Szmolka, ESA - ESTEC (Netherlands) | |
14:00 - 17:00 | › Lifetime assessment of materials for space environment using Dynamic Mechanical Analyser (DMA) - Livia D'Onofrio, Thales Alenia Space | |
14:00 - 17:00 | › THE COMPLEX IRRADIATION FACILITY (CIF) AT DLR BREMEN - Erik Klein, German Aerospace Center (DLR), Institute of Space Systems, Bremen, Germany | |
14:00 - 17:00 | › Examples of laboratory tests to assess formulation changes - Sarah Rodriguez, European Space Research and Technology Centre | |
14:00 - 17:00 | › Material compatibility and accelerated aging study of space relevant polymers - Lucia Propato, Thales Alenia Space - Livia D'Onofrio, Thales Alenia Space | |
14:00 - 17:00 | › Overview of the European FIAMMA flammability facility for Human Space Missions - Cathal Mooney, ESA | |
14:00 - 17:00 | › Comparison test result between conventional CQCM and advanced cryo-TQCM at liquid nitrogen temperature. - Hiroki Kimura, NIHON DEMPA KOGYO CO.,LTD. | |
14:00 - 17:00 | › The Ultraviolet Absorption Edge Characteristics of Silica Glass under Gamma Ray and Vacuum Ultraviolet Radiation - Donglin Cai, Harbin Institute of Technology | |
14:00 - 17:00 | › Virtual Lab: the digitalization of qualification testing laboratory. - Mari Carmen López, ALTER Technology | |
14:00 - 17:00 | › Study of polymer films for stratospheric balloon envelopes - Simon Lewandowski, DPHY, ONERA, Université de Toulouse | |
14:00 - 17:00 | › Automotive Grade Components Up-Screening for New Space Missions - Joel Bentzen, AVS UK - Alberto Garbayo, AVS UK | |
14:00 - 17:00 | › Flexible Perovskite solar cells employing in-house engineered hole transport material irradiated under atmosferic neutrons - Giulio Koch, Universita degli Studi di Roma Tor Vergata | |
14:00 - 17:00 | › Mechanical behavior of balloon's enveloppe materials in stratospheric environment - LAURE GEVAUX, Centre National d'Études Spatiales [Toulouse] | |
14:00 - 17:00 | › ESA ESTEC's charging properties measurement facility simulation - Grégoire Déprez, ESA - ESTEC (Netherlands) | |
14:00 - 17:00 | › Contamination flight experiments : detection/trapping and UV radiation exposure - Emmanuel GOUISSET, Intraspec Technologies | |
14:00 - 17:00 | › Presentation of EMA CNES samples: an update before flight - Sophie Perraud, Centre National d\'Études Spatiales [Toulouse] | |
14:00 - 17:00 | › Secondary Electron Emission Measurements of Black paint for on-orbit demonstration evaluation - Kumi Nitta, Japan Aerospace Exploration Agency | |
14:00 - 17:00 | › LSTM Mission: Performance evaluation of contamination effects in the infra-red - Szilvia Szmolka, European Space Agency - ESTEC | |
14:00 - 17:00 | › Results of MISSE-14 Solar & Drag Sail Material Test - Andreas Witzke, German Aerospace Center (DLR), Institute of Space Systems, Bremen, Germany | |
14:00 - 17:00 | › Can thin films deposited by ALD reduce the outgassing? A case study by dynamic outgassing on 3D-printed Polyether Ether Ketone (PEEK). - Theo Henry, ESA-ESTEC, TEC-QEE, Keplerlaan 1, 2200 AZ Noordwijk, The Netherlands | |
14:00 - 17:00 | › Synthesis of self-healing polymers for space applications - Mickael Du Fraysseix, Team 1 LCPO : Polymerization Catalyses & Engineering, ONERA, Centre National d\'Études Spatiales [Toulouse] - Simon Lewandowski, ONERA | |
14:00 - 17:00 | › Nanostructuring of phenolic matrices by polymeric additives in ablative materials for re-entry space vehicles - Rita Bottacchiari, Department of Chemical Engineering Materials Environment, Sapienza University of Rome, via Eudossiana 18, 00184 Rome, Italy. INSTM reference Laboratory for Materials and Surface Treatments | |
14:00 - 17:00 | › Development of novel lubricant formulations for application in space environment - Fabian Schüler, Materiales GmbH | |
14:00 - 17:00 | › Black Low Reflectance Inorganic Coating for Metal Additive Manufactured Satellite Lightweight Components - Suman Shrestha, Keronite Curtiss-Wright Surface Technology | |
14:00 - 17:00 | › MATREX - MATerial Recording EXperience: Materials database for space application - Marion Broutelle, Centre National d\'Études Spatiales [Toulouse] | |
14:00 - 17:00 | › Development of a new Silicon Carbide thermal spray coating for space applications. - Daniel Perello-Badia, Seram Coatings AS | |
14:00 - 17:00 | › Enhancing Space Deployable Structures: Self-Deployable Smart Composites Integrating 3D Graphene Foam with Shape Memory Polymers and Thermal Control Coatings - Ranjana Shivakumar, Nanyang Technological University | |
14:00 - 17:00 | › NORMALLY CLOSED VALVE WITH SHAPE MEMORY ALLOY ACTUATOR – A SHAPE MEMORY ALLOY APPLICATION EXAMPLE - Christian Lenz, Ariane Group | |
14:00 - 17:00 | › Innovative repairing technique via Additive Manufacturing - Andrea Di Benedetto, Thales Alenia Space | |
14:00 - 17:00 | › Thermoplastic composites for satellite bus structure - Gizynski Maciej, Lukasiewicz Research Network - Institute of Aviation | |
14:00 - 17:00 | › Impact of porosity on thermal and mechanical properties of copper parts additively manufactured by material extrusion (MEX) - Bernardo Alves, Centre for Mechanical Engineering, Materials and Processes | |
14:00 - 17:00 | › ACTIVE PZT CERAMIC PROTECTION ON CARBON RELATED ORBITAL STRUCTURE FOR SPACE ENVIRONMENTAL DAMAGE - Daeweon Kim, Silla University | |
14:00 - 17:00 | › Physical properties of pure transition metal nitrides thin films - Marjorie CAVARROC, Safran Tech, Chateaufort, CS 80112, 78772 Magny-les-Hameaux, France | |
14:00 - 17:00 | › Flexible Lightweight Photoelectronic Materials and Devices for Space Applications - Min Qian, East China Univeristy of Science and Technology | |
14:00 - 17:00 | › Physical properties of pure vanadium nitrides thin films - Marjorie CAVARROC, Safran Tech, Chateaufort, CS 80112, 78772 Magny-les-Hameaux, France | |
14:00 - 17:00 | › Testing with Dust at the DROP lab of ONERA : facilities and approach - Sophie Duzellier & Jean-Charles Matéo-Vélez, DPHY, ONERA, Université de Toulouse | |
15:30 - 17:00 | Round Tables (auditorium and side rooms) | |
19:00 - 23:55 | Conference Dinner - ESTEREL Arena |
Thursday, October 10, 2024
Time | Event | (+) |
09:00 - 10:30 | Planetary Environment & Lunar Dust Mitigation #2 (auditorium) - A. Saverino (TAS) & C. Steagall (NASA JSC) | (+) |
09:00 - 09:20 | › Interaction of Lunar Dust Simulants with Materials: Importance of Charging - Jacob Kleiman, Integrity Testing Laboratory Inc | |
09:20 - 09:40 | › Ground testing of lunar dust simulant electrostatic charging under irradiation - Jean-Charles Matéo-Vélez, DPHY, ONERA, Université de Toulouse | |
09:40 - 10:00 | › Lunar dust Contamination on habitable modules for exploration : impacts and mitigation approach for I-Hab - Ilaria Locantore, Thales Alenia Space | |
10:00 - 10:20 | › Design, Synthesis and Characterization of Novel Space Materials for Lunar Passive Dust Mitigation - Guido Saccone, Italian Aerospace Research Centre | |
10:30 - 11:00 | Coffee break (Exhibition hall) | |
11:00 - 12:30 | Atomic Oxygen & LEO/VLEO Missions #2 (auditorium) - A. Goto (Jaxa) & S. Remaury (CNES) | (+) |
11:00 - 11:20 | › Individual erosion yields of FEP by atomic oxygen and by argon in simulated VLEO environments - Masahito Tagawa, Kobe University | |
11:20 - 11:40 | › Evaluation of atomic oxygen effects obtained onboard SLATS/MDM - Yugo Kimoto, Japan Aerospace Exploration Agency [Tsukuba] | |
11:40 - 12:00 | › Molecular Beam Investigations of Atomic Oxygen Reactivity and Scattering on Material Surfaces for Satellites in Very Low Earth Orbit - Timothy Minton, University of Colorado Boulder | |
12:00 - 12:20 | › Drag and O-atom Exposure Modeling for Satellites in Very Low Earth Orbit - Tom Schwartzentruber, Department of Aerospace Engineering and Mechanics, University of Minnesota | |
12:30 - 14:00 | Lunch (Exhibition hall) | |
14:00 - 16:00 | Contamination #3 (auditorium) - D. Faye (CNES) & C. Soares (NASA JPL) | (+) |
14:00 - 14:20 | › Laser-Induced Contamination: Analyzing deposits from epoxy outgassing under 355 nm irradiation. - Amer Aoun, Institut Fresnel, Centre National d'Études Spatiales | |
14:20 - 14:40 | › Use of Multimodal camera for quick contamination assessments - Guillaume Thin, Lumetis, France | |
14:40 - 15:00 | › Simulation Approach and Examples of Particulate Contamination Transport Inside Fairing using DUSTFLOW - Armen Jaworski, CIM-mes Projekt | |
15:00 - 15:20 | › The Effect of Impingement Angle on Bipropellant Thruster Plume Degradation of Spacecraft Materials - Courtney Steagall, NASA, Johnson Space Center, Houston, TX, USA | |
15:20 - 15:40 | › Micro-ElectroMechanical Systems (MEMS) Fabry-Perot (FP) spectrometer for measurement of contamination deposition - Gregory Bouquet, Smart Sensor Systems and Microsystems, SINTEF, Oslo, Norway | |
16:00 - 16:30 | Coffee break (Exhibition hall) | |
16:30 - 18:00 | Innovative & Sustainable Materials #2 (auditorium) - C. Puig (ADS) & D. Kim (Silla Univ.) | (+) |
16:30 - 16:50 | › Research on New Siloxane-Block-Polyimide Film for Space Application - Yugo Kimoto, Japan Aerospace Exploration Agency [Tsukuba] | |
16:50 - 17:10 | › Self-healing Composite for MMOD Impact Damage Recovery - Wojciech Guziewicz, AGH University of Krakow, Space Technology Centre | |
17:10 - 17:30 | › Development and qualification of a Glass Fabric for use in harsh space exploration environments - Christoph Roupec, Beyond Gravity Austria GmbH | |
17:30 - 17:50 | › Development of Cryogenic Phase Change Materials for Lunar Sample Return - Erin Hayward, NASA Marshall Space Flight Center |
Friday, October 11, 2024
Time | Event | (+) |
08:40 - 10:30 | Environment Effects on Materials #2 (auditorium) - S. Lewandowski (ONERA) & J. Minow (NASA MFSC) | (+) |
08:40 - 09:00 | › MODIFICATION OF CHEMICAL CONTAMINANTS EXPOSED TO UV-RADIATION: A METHODOLOGICAL APPROACH APPLIED TO EPOXY ADHESIVES - Xavier Coqueret, CNRS UMR 7312 - Delphine FAYE, DTN/QE/LE | |
09:00 - 09:20 | › Optical signature simulation of proton-irradiated space white paint coating - Agnès Lecadre-Scotto, DPHY, ONERA, Université de Toulouse | |
09:20 - 09:40 | › First Evaluation under Ultraviolet Radiations and Thermal Cycles of Nanoparticle-based Protective Coatings for Heterojunction Silicon Cells - Philippe Voarino, Univ. Grenoble Alpes, CEA, Liten, Campus Ines | |
09:40 - 10:00 | › Physical properties evolution of PEEK under proton irradiation - Lise Sujol, ONERA, CIRIMAT | |
10:00 - 10:20 | › Update on Planetary, Lunar, & Asteroid Natural Environment Testbed (PLANET) - Erin Hayward, NASA Marshall Space Flight Center | |
10:30 - 11:00 | Coffee break (Exhibition hall) | |
11:00 - 12:00 | Planetary Environment & Lunar Dust Mitigation #3 (auditorium) - JC. Mateo-Velez (ONERA) & A. Tighe (ESA) | (+) |
11:00 - 11:20 | › A combined Eulerian-Lagrangian approach to simulation of plume-regolith interaction during the descent and ascent phase of the lunar lander - Armen Jaworski, CIM-mes Projekt | |
11:20 - 11:40 | › Instrumental methods to monitor and counter planetary oxidants in space applications - Elias Chatzitheodoridis, National Technical University of Athens, Greece, ESA - ESTEC (Netherlands) | |
11:40 - 12:00 | › The significance of producing activated Lunar and Martian dust simulants of high-fidelity for planetary exploration and habitability purposes - Elias Chatzitheodoridis, National Technical University of Athens, Greece, ESA - ESTEC (Netherlands) | |
12:00 - 12:30 | Closing Session (auditorium) |